回复帖子：（lqk）在我们的评估底板上不连接显示屏，是否能...

用户名：

*您没有注册？

密码：

*忘记论坛密码？标题采用“回复：XXX....”

验证码

点击获取验证码

主题标题：

*不得超过 200 个汉字

内容

主题最新回顾(发布时间：2020-7-20 9:30:00)
-- 作者：lqk -- 在我们的评估底板上不连接显示屏，是否能正常启动？

主题最新回顾(发布时间：2020-7-20 9:30:00)

-- 作者：lqk
--

在我们的评估底板上不连接显示屏，是否能正常启动？

主题最新回顾(发布时间：2020-7-18 9:32:00)
-- 作者：lonely966 -- ESM335X接屏幕启动卡住屏幕型号为官网推荐的G150XTN06.0 ，lvds接口。 lvds插在cn5上之后开机信息如下： Jumping to bootloader EBOOT @ 0x8FE00000 Microsoft Windows CE Bootloader Common Library Version 1.4 Built Sep 4 2019 14:10:31 INFO:OALLogSetZones: dpCurSettings.ulZoneMask: 0x8409 Texas Instruments Windows CE EBOOT for AM33x, Built Sep 4 2019 at 14:14:01 EBOOT Version 0.0.1, BSP BSP_WINCE_ARM_A8 02.30.00.01 ecc type:4 System ready! Preparing for download... INFO: Predownload.... FMD_Init: V2, Dec 2 2019 10:57:34 Checking bootloader blocks(0 - 1023) are marked as reserved FMD_Init: V2, Dec 2 2019 10:57:34 BLReadBootCfg done BOOT_CFG_SIGNATURE is different, read -1, expect 1111705159 WARN: Boot config wasn't found, using defaults INFO: SW3 boot setting: 0x12 IT IS A ESM3354 BOARD >>> Forcing cold boot (non-persistent registry and other data will be wiped) <<< +FindBMP FMD_Init: V2, Dec 2 2019 10:57:34 OALFlashStoreBufferedRead 1 -FindBMP::1024x600, BitCount=8, bfOffBits=690, bfSize=615092 ShowBmp: Generic TFT LcdPdd_LCD_Initialize: 1024*600 32bpp INFO: ESM335x is running in debug mode 到这里就卡住不动了屏幕也不亮求解决

主题最新回顾(发布时间：2020-7-18 9:32:00)

-- 作者：lonely966
-- ESM335X接屏幕启动卡住

屏幕型号为官网推荐的G150XTN06.0 ，lvds接口。

lvds插在cn5上之后开机信息如下：

Jumping to bootloader EBOOT @ 0x8FE00000

Microsoft Windows CE Bootloader Common Library Version 1.4 Built Sep 4 2019 14:10:31

INFO:OALLogSetZones: dpCurSettings.ulZoneMask: 0x8409

Texas Instruments Windows CE EBOOT for AM33x, Built Sep 4 2019 at 14:14:01

EBOOT Version 0.0.1, BSP BSP_WINCE_ARM_A8 02.30.00.01

ecc type:4

System ready!

Preparing for download...

INFO: Predownload....

FMD_Init: V2, Dec 2 2019 10:57:34

Checking bootloader blocks(0 - 1023) are marked as reserved

FMD_Init: V2, Dec 2 2019 10:57:34

BLReadBootCfg done

BOOT_CFG_SIGNATURE is different, read -1, expect 1111705159

WARN: Boot config wasn't found, using defaults

INFO: SW3 boot setting: 0x12

IT IS A ESM3354 BOARD

>>> Forcing cold boot (non-persistent registry and other data will be wiped) <<<

+FindBMP

FMD_Init: V2, Dec 2 2019 10:57:34

OALFlashStoreBufferedRead 1

-FindBMP::1024x600, BitCount=8, bfOffBits=690, bfSize=615092

ShowBmp: Generic TFT

LcdPdd_LCD_Initialize: 1024*600 32bpp

INFO: ESM335x is running in debug mode

到这里就卡住不动了

屏幕也不亮

求解决