| 主题最新回顾(发布时间：2011-6-22 8:39:00) |
|---|
|
-- 作者：x10(222.210.*.*)
-- 启动是正常的，主要是SD初始化没有成功，如果没有插卡，这种情况是正常的，系统会加载SD卡驱动若干次，若不成功就会停下来。 |
| 主题最新回顾(发布时间：2011-6-21 17:17:00) |
|---|
|
-- 作者：沈工(59.174.*.*)
-- +SOCSaveAndDisableAllIntrBeforeSuspend() SOCPioSaveAndDisableAllIntrBeforeSuspend() +SOCPioControllerIntrEnable() RomBOOT FIRSTBOOT::LowLevelInit: OK Nandflash Controller Init OK HY27US0812 64MB Starting eboot ... Master Clock is 48060170 Hz Master Clock is 49925541 Hz Master Clock is 49925541 Hz 5 Debug serial initialized ........OK OK Microsoft Windows CE Ethernet Bootloader Common Library Version 1.1 Built Dec 21 2010 14:11:02 Microsoft Windows CE 5.0 Ethernet Bootloader for the AT91SAM926xEK board Adaptation performed by ADENEO (c) 2007 Master Clock is 49925541 Hz Master Clock is 49925541 Hz ->LoadBlocksInfo LoadBlocksInfo::g_pBlocksInfo : 0x800A8B00 <-LoadBlocksInfo ->FindBMP::640x480, bfOffBits=1078, bfSize=308278 Master Clock is 49925541 Hz Press [ENTER] to launch image stored in flash or [SPACE] to cancel. Initiating image launch in 5 seconds 4 seconds 3 seconds 2 seconds 1 seconds 0 seconds System ready! Preparing for download... Initialize image flash .......OK Launching windows CE image by jumping at address 0x200c6000 Master Clock is 49925541 Hz 亥箲捷蛠CE Kernel for ARM (Thumb Enabled) Built on Aug 4 2008 at 18:38:38 ProcessorType=0926 Revision=5 sp_abt=ffff5000 sp_irq=ffff2800 sp_undef=ffffc800 OEMAddressTable = 800c6020 Windows CE Firmware Init BSP 1.7.0 for the AT91SAM9261EK board (built Dec 22 2010) Adaptation performed by ADENEO (c) 2007 +OALIntrInit +SOCPioIntrInit() -SOCPioIntrInit() -OALIntrInit(rc = 1) Initialize driver globals Zeros area... pDrvGlobalArea 0x800c4000 size 0x800 (0x800c4800 -0x800c4000) Initialize driver globals Zeros area...done 倕?驽膮茊劍DGC吜δ苿膮猗------------------- |PLLA : 199702165 Hz| |PLLB : 95857034 Hz| -------------------- Master Clock is 99851082 Hz Master Clock is 99851082 Hz OALTimerInit +OALTimerInit Master Clock is 99851082 Hz Test : 0x1860 g_oalTimer.msecPerSysTick : 0x1 g_oalTimer.countsPerMSec : 0x1860 g_oalTimer.countsMargin : 0x0 g_oalTimer.maxPeriodMSec : 0xa7 g_oalTimer.countsPerSysTick : 0x1860 g_oalTimer.actualMSecPerSysTick : 0x1 g_oalTimer.actualCountsPerSysTick : 0x1860 g_oalTimer.curCounts : 0x0 Master Clock is 99851082 Hz -OALTimerInit pDrvGlobalArea->bEboot == TRUE. Forcing Clean Object store +OEMPowerManagerInit -OEMPowerManagerInit OALKitlStart Firmware Init Done. EM9161 ISA Interface Init Master Clock is 99851082 Hz +OEMInitWatchDogTimer AT91SAM926x_DispWatchDog 8000! -OEMInitWatchDogTimer (result = 0) OEMInit::pause WDT refresh Sp=ffffc7cc OEMIoControl: Unsupported Code 0x10100b4 - device 0x0101 func 45 +OALIoCtlHalInitRTC(...) OALIoCtlHalInitRTC::GPBR0=0xe3e6ba65, GPBR1=0xbc7, GPBR2=0x46, CHKSUM=0x0 -OALIoCtlHalInitRTC(rc = 0) OEMIoControl: Unsupported Code 0x101008c - device 0x0101 func 35 ->FMD_Init +SoftECC Dec 22 2010 11:59:15 ->LLD_Init::Small Sector NandChipset +OALIntrRequestSysIntr(1, 0x87, 0x00000000) -OALIntrRequestSysIntr(sysIntr = 16) Master Clock is 99851082 Hz SelectConfig::Device detected : Hynix - HY27US0812 +OALIntrReleaseSysIntr(16) ->LLD_Init::Small Sector NandChipset +OALIntrRequestSysIntr(1, 0x87, 0x00000000) -OALIntrRequestSysIntr(sysIntr = 16) Master Clock is 99851082 Hz OEMIoControl: Unsupported Code 0x10100c4 - device 0x0101 func 49 OEMIoControl: Unsupported Code 0x10100c4 - device 0x0101 func 49 SPIDriver - SPI_Init - Context: Drivers\Active\03 +OALIntrRequestSysIntr(1, 0xc, 0x00000000) -OALIntrRequestSysIntr(sysIntr = 17) SPIDriver - SPI_Init - Context: Drivers\Active\04 SPIDriver - SPI_Init - Context: Drivers\Active\05 OEMIoControl: Unsupported Code 0x10100d0 - device 0x0101 func 52 OEMIoControl: Unsupported Code 0x10100f8 - device 0x0101 func 62 EDriverInitialize:: -> ConfigureChipSelect() Master Clock is 99851082 Hz EM9161_V1::ConfigureChipSelect::set PC3 -> H Registry ethernet config EDriverInitialize:: ->DeviceRegisterAdapter() EDriverInitialize:: ->EDeviceRegisterIoSpace() EDeviceRegisterIoSpace::Chip ID = 0A469000 EDeviceInitialize::Hardware Initialization +OALIntrRequestSysIntr(1, 0x1e, 0x00000000) -OALIntrRequestSysIntr(sysIntr = 18) +OALIntrReleaseSysIntr(18) +OALIntrRequestSysIntr(1, 0x1e, 0x00000000) -OALIntrRequestSysIntr(sysIntr = 18) +OALIntrRequestSysIntr(1, 0x1e, 0x00000008) -OALIntrRequestSysIntr(sysIntr = 18) USB:OhcdPdd_Init ++InitializeOHCI +OALIntrRequestSysIntr(1, 0x14, 0x00000000) -OALIntrRequestSysIntr(sysIntr = 19) --InitializeOHCI Master Clock is 99851082 Hz +OALIntrRequestSysIntr(1, 0xa, 0x00000000) -OALIntrRequestSysIntr(sysIntr = 20) +OALIntrRequestSysIntr(1, 0x65, 0x00000000) -OALIntrRequestSysIntr(sysIntr = 21) DeviceFolder::LoadDevice!Enumerate Found deprecated load instructions at (Drivers\BuiltIn\AFD). Driver cannot be unloaded. Quit Audio Driver Installation! [ERROR] "PDD_AudioInitialize() FAILED" +OALIntrRequestSysIntr(1, 0x6, 0x00000000) -OALIntrRequestSysIntr(sysIntr = 22) Master Clock is 99851082 Hz +OALIntrRequestSysIntr(1, 0x7, 0x00000000) -OALIntrRequestSysIntr(sysIntr = 23) Master Clock is 99851082 Hz +OALIntrRequestSysIntr(1, 0x8, 0x00000000) -OALIntrRequestSysIntr(sysIntr = 24) Master Clock is 99851082 Hz DeviceFolder::LoadDevice!Enumerate Found deprecated load instructions at (Drivers\BuiltIn\PPP). Driver cannot be unloaded. ExSerInit::COM5 - Init 16550 +OALIntrRequestSysIntr(1, 0x1f, 0x00000000) -OALIntrRequestSysIntr(sysIntr = 25) ExSerInit -> success! ExSerInit::quit COM6 driver installation. Hardware doesn<|>t init correctly, COM_Init failed ExSerInit::quit COM7 driver installation. Hardware doesn<|>t init correctly, COM_Init failed ExSerInit::quit COM8 driver installation. Hardware doesn<|>t init correctly, COM_Init failed ExSerInit::quit COM9 driver installation. Hardware doesn<|>t init correctly, COM_Init failed SD/MMC card insertion detected SDMMC:InitDisk with pDisk 0x57880 +OALIntrRequestSysIntr(1, 0x9, 0x00000000) -OALIntrRequestSysIntr(sysIntr = 26) +OALIntrRequestSysIntr(1, 0x54, 0x00000000) -OALIntrRequestSysIntr(sysIntr = 27) Display mode #0, 640x480x16bpp @ 0hz Frame buffer is Uncached +OALIntrRequestSysIntr(1, 0x15, 0x00000000) -OALIntrRequestSysIntr(sysIntr = 28) Master Clock is 99851082 Hz OEMIoControl: Unsupported Code 0x10100fc - device 0x0101 func 63 Lyg.p: Layout Manager successfully initialized to 1 +OALIntrRequestSysIntr(1, 0x82, 0x00000000) -OALIntrRequestSysIntr(sysIntr = 29) InitializeSPIDriver::EM9161_V3 TouchScreenDriver TOUCH:ThrdPrio = 100, ThrdHighPrio = 100 Maximum Allowed Error 16: SDCard Initialisation failed +OALIntrReleaseSysIntr(26) EM9161 Emtronix Built at Dec 22 2010 11:59:24 Adaptation performed by Emtronix (c) wstartup::resume WDT refresh 1 AdapterName: DM9CE1Explorer(V2.0) taskbar thread started. NDISPWR:: Found adapter [DM9CE1] SD/MMC card insertion detected SDMMC:InitDisk with pDisk 0x618640 +OALIntrRequestSysIntr(1, 0x9, 0x00000000) -OALIntrRequestSysIntr(sysIntr = 26) CopyFile: 0 RegOpenKeyEx Comm\DM9CE1 0 IPAddr: 192.168.1.106 SunnetMask: 255.255.255.0 Gateway: 192.168.1.1 FileName:\NandFlash\dbginfo.txt CreatFile 43B775C6 File bResult=1 nBytes=206 DHCP Disable IP Parameters aren<|>t changed, need not set AdapterIPProperties |
| 主题最新回顾(发布时间：2011-6-21 17:12:00) |
|---|
|
-- 作者：zxw(125.71.*.*)
-- 请重新格式化一下子SD卡试试。 |
| 主题最新回顾(发布时间：2011-6-21 17:08:00) |
|---|
|
-- 作者：沈工(59.174.*.*)
-- 朱工：串口信息 omBOOT FIRSTBOOT::LowLevelInit: OK Nandflash Controller Init OK HY27US0812 64MB Starting eboot ... Master Clock is ? Hz Master Clock is 贩?Hz Master Clock is 49925541 Hz 5 Debug serial initialized ........OK OK Microsoft Windows CE Ethernet Bootloader Common Library Version 1.1 Built Dec 21 2010 14:11:02 Microsoft Windows CE 5.0 Ethernet Bootloader for the AT91SAM926xEK board Adaptation performed by ADENEO (c) 2007 Master Clock is 49925541 Hz Master Clock is 49925541 Hz ->LoadBlocksInfo LoadBlocksInfo::g_pBlocksInfo : 0x800A8B00 <-LoadBlocksInfo ->FindBMP::640x480, bfOffBits=1078, bfSize=308278 Master Clock is 49925541 Hz Press [ENTER] to launch image stored in flash or [SPACE] to cancel. Initiating image launch in 5 seconds 4 seconds 3 seconds 2 seconds 1 seconds 0 seconds System ready! Preparing for download... Initialize image flash .......OK Launching windows CE image by jumping at address 0x200c6000 Master Clock is 49925541 Hz 亥箲捷蛠CE Kernel for ARM (Thumb Enabled) Built on Aug 4 2008 at 18:38:38 ProcessorType=0926 Revision=5 sp_abt=ffff5000 sp_irq=ffff2800 sp_undef=ffffc800 OEMAddressTable = 800c6020 Windows CE Firmware Init BSP 1.7.0 for the AT91SAM9261EK board (built Dec 22 2010) Adaptation performed by ADENEO (c) 2007 +OALIntrInit +SOCPioIntrInit() -SOCPioIntrInit() -OALIntrInit(rc = 1) Initialize driver globals Zeros area... pDrvGlobalArea 0x800c4000 size 0x800 (0x800c4800 -0x800c4000) Initialize driver globals Zeros area...done 倕?驽膮茊劍DGC吜δ苿膮猗------------------- |PLLA : 199702165 Hz| |PLLB : 95857034 Hz| -------------------- Master Clock is 99851082 Hz Master Clock is 99851082 Hz OALTimerInit +OALTimerInit Master Clock is 99851082 Hz Test : 0x1860 g_oalTimer.msecPerSysTick : 0x1 g_oalTimer.countsPerMSec : 0x1860 g_oalTimer.countsMargin : 0x0 g_oalTimer.maxPeriodMSec : 0xa7 g_oalTimer.countsPerSysTick : 0x1860 g_oalTimer.actualMSecPerSysTick : 0x1 g_oalTimer.actualCountsPerSysTick : 0x1860 g_oalTimer.curCounts : 0x0 Master Clock is 99851082 Hz -OALTimerInit pDrvGlobalArea->bEboot == TRUE. Forcing Clean Object store +OEMPowerManagerInit -OEMPowerManagerInit OALKitlStart Firmware Init Done. EM9161 ISA Interface Init Master Clock is 99851082 Hz +OEMInitWatchDogTimer AT91SAM926x_DispWatchDog 8000! -OEMInitWatchDogTimer (result = 0) OEMInit::pause WDT refresh Sp=ffffc7cc OEMIoControl: Unsupported Code 0x10100b4 - device 0x0101 func 45 +OALIoCtlHalInitRTC(...) OALIoCtlHalInitRTC::GPBR0=0xe3dae009, GPBR1=0xbc7, GPBR2=0x88, CHKSUM=0x0 -OALIoCtlHalInitRTC(rc = 0) OEMIoControl: Unsupported Code 0x101008c - device 0x0101 func 35 ->FMD_Init +SoftECC Dec 22 2010 11:59:15 ->LLD_Init::Small Sector NandChipset +OALIntrRequestSysIntr(1, 0x87, 0x00000000) -OALIntrRequestSysIntr(sysIntr = 16) Master Clock is 99851082 Hz SelectConfig::Device detected : Hynix - HY27US0812 +OALIntrReleaseSysIntr(16) ->LLD_Init::Small Sector NandChipset +OALIntrRequestSysIntr(1, 0x87, 0x00000000) -OALIntrRequestSysIntr(sysIntr = 16) Master Clock is 99851082 Hz OEMIoControl: Unsupported Code 0x10100c4 - device 0x0101 func 49 OEMIoControl: Unsupported Code 0x10100c4 - device 0x0101 func 49 SPIDriver - SPI_Init - Context: Drivers\Active\03 +OALIntrRequestSysIntr(1, 0xc, 0x00000000) -OALIntrRequestSysIntr(sysIntr = 17) SPIDriver - SPI_Init - Context: Drivers\Active\04 SPIDriver - SPI_Init - Context: Drivers\Active\05 OEMIoControl: Unsupported Code 0x10100d0 - device 0x0101 func 52 OEMIoControl: Unsupported Code 0x10100f8 - device 0x0101 func 62 EDriverInitialize:: -> ConfigureChipSelect() Master Clock is 99851082 Hz EM9161_V1::ConfigureChipSelect::set PC3 -> H Registry ethernet config EDriverInitialize:: ->DeviceRegisterAdapter() EDriverInitialize:: ->EDeviceRegisterIoSpace() EDeviceRegisterIoSpace::Chip ID = 0A469000 EDeviceInitialize::Hardware Initialization +OALIntrRequestSysIntr(1, 0x1e, 0x00000000) -OALIntrRequestSysIntr(sysIntr = 18) +OALIntrReleaseSysIntr(18) +OALIntrRequestSysIntr(1, 0x1e, 0x00000000) -OALIntrRequestSysIntr(sysIntr = 18) +OALIntrRequestSysIntr(1, 0x1e, 0x00000008) -OALIntrRequestSysIntr(sysIntr = 18) USB:OhcdPdd_Init ++InitializeOHCI +OALIntrRequestSysIntr(1, 0x14, 0x00000000) -OALIntrRequestSysIntr(sysIntr = 19) --InitializeOHCI Master Clock is 99851082 Hz +OALIntrRequestSysIntr(1, 0xa, 0x00000000) -OALIntrRequestSysIntr(sysIntr = 20) +OALIntrRequestSysIntr(1, 0x65, 0x00000000) -OALIntrRequestSysIntr(sysIntr = 21) DeviceFolder::LoadDevice!Enumerate Found deprecated load instructions at (Drivers\BuiltIn\AFD). Driver cannot be unloaded. Quit Audio Driver Installation! [ERROR] "PDD_AudioInitialize() FAILED" +OALIntrRequestSysIntr(1, 0x6, 0x00000000) -OALIntrRequestSysIntr(sysIntr = 22) Master Clock is 99851082 Hz +OALIntrRequestSysIntr(1, 0x7, 0x00000000) -OALIntrRequestSysIntr(sysIntr = 23) Master Clock is 99851082 Hz +OALIntrRequestSysIntr(1, 0x8, 0x00000000) -OALIntrRequestSysIntr(sysIntr = 24) Master Clock is 99851082 Hz DeviceFolder::LoadDevice!Enumerate Found deprecated load instructions at (Drivers\BuiltIn\PPP). Driver cannot be unloaded. ExSerInit::COM5 - Init 16550 +OALIntrRequestSysIntr(1, 0x1f, 0x00000000) -OALIntrRequestSysIntr(sysIntr = 25) ExSerInit -> success! ExSerInit::quit COM6 driver installation. Hardware doesn<|>t init correctly, COM_Init failed ExSerInit::quit COM7 driver installation. Hardware doesn<|>t init correctly, COM_Init failed ExSerInit::quit COM8 driver installation. Hardware doesn<|>t init correctly, COM_Init failed ExSerInit::quit COM9 driver installation. Hardware doesn<|>t init correctly, COM_Init failed SD/MMC card insertion detected SDMMC:InitDisk with pDisk 0x578b0 +OALIntrRequestSysIntr(1, 0x9, 0x00000000) -OALIntrRequestSysIntr(sysIntr = 26) +OALIntrRequestSysIntr(1, 0x54, 0x00000000) -OALIntrRequestSysIntr(sysIntr = 27) Display mode #0, 640x480x16bpp @ 0hz Frame buffer is Uncached +OALIntrRequestSysIntr(1, 0x15, 0x00000000) -OALIntrRequestSysIntr(sysIntr = 28) Master Clock is 99851082 Hz OEMIoControl: Unsupported Code 0x10100fc - device 0x0101 func 63 Lyg.p: Layout Manager successfully initialized to 1 +OALIntrRequestSysIntr(1, 0x82, 0x00000000) -OALIntrRequestSysIntr(sysIntr = 29) InitializeSPIDriver::EM9161_V3 TouchScreenDriver TOUCH:ThrdPrio = 100, ThrdHighPrio = 100 Maximum Allowed Error 16: Back Light -> Turn Off Back Light -> Turn On SDCard Initialisation failed +OALIntrReleaseSysIntr(26) EM9161 Emtronix Built at Dec 22 2010 11:59:24 Adaptation performed by Emtronix (c) wstartup::resume WDT refresh 1 AdapterName: DM9CE1Explorer(V2.0) taskbar thread started. NDISPWR:: Found adapter [DM9CE1] SD/MMC card insertion detected SDMMC:InitDisk with pDisk 0x6187e0 +OALIntrRequestSysIntr(1, 0x9, 0x00000000) -OALIntrRequestSysIntr(sysIntr = 26) CopyFile: 0 RegOpenKeyEx Comm\DM9CE1 0 IPAddr: 192.168.1.106 SunnetMask: 255.255.255.0 Gateway: 192.168.1.1 FileName:\NandFlash\dbginfo.txt CreatFile E3DD3DB6 File bResult=1 nBytes=206 DHCP Disable IP Parameters aren<|>t changed, need not set AdapterIPProperties SDCard Initialisation failed +OALIntrReleaseSysIntr(26) SD/MMC card insertion detected SDMMC:InitDisk with pDisk 0x619870 +OALIntrRequestSysIntr(1, 0x9, 0x00000000) -OALIntrRequestSysIntr(sysIntr = 26) |