共有289人关注过本帖树形打印复制链接

主题:求助:EM9170的VGA不能用,有什么要求吗

帅哥哟,离线,有人找我吗?
MOMO
  1楼 | 信息 | 搜索 | 邮箱 | 主页


加好友 发短信
等级:新手上路
求助:EM9170的VGA不能用,有什么要求吗  发帖心情 Post By:2017-9-22 22:02:00 [只看该作者]

尝试重新下载内核,VS软件貌似也能进去调试,以下是串口打印的信息:

Microsoft Windows CE Bootloader Common Library Version 1.4 Built Jan  6 2015 10:34:27

Microsoft Windows CE Ethernet Bootloader 1.0 for MX25 3DS (Jan  6 2015 10:38:03)

INFO:  Bootloader launched from NAND

FMD_Init::0

FMD_Init::NumberOfChip=1

INFO: OEMPlatformInit: Initialized NAND flash device.

->EM9170_IOConfig

->EM9170_ISABusSetup

INFO: Loading boot configuration from NAND

-> Eboot Splash Screen

-> Display_GetScreenConf

->FindBMP

EBOOT_ReadFlash: Reading 2048 bytes from NAND...

NandFlashChip: wDataBytesPerSector = 0x800 bytes,  wSectorsPerBlock = 0x40

EBOOT_ReadFlash: reading completed successfully.

->FindBMP::800x600, bfOffBits=1066, bfSize=481068

EBOOT_ReadFlash: Reading 481068 bytes from NAND...

NandFlashChip: wDataBytesPerSector = 0x800 bytes,  wSectorsPerBlock = 0x40

EBOOT_ReadFlash: reading completed successfully.

Display Format = 800*600

-> Display_Init

LCDC6xhw::LCDRefClk = 66500000

-> Display_Show

-> Display_On

System ready!

Preparing for download...


Press [ENTER] to launch image stored in NAND flash or [SPACE] to cancel.


Initiating image launch in 0 seconds.  

Launching flash image  ... 

-BLMenu .

INFO: Using device name: 'MX2533'

INFO: Reading NK image from NAND (please wait)...

INFO: BinFS -> find MBR...

INFO: use RAM buffer at 0x83FF8000 as MBR buffer

INFO: Find MBR start from NAND flash sector [0x400].

INFO: MBR is at NAND flash block [0x10].

INFO: Partition 0, File system 0x23, StartSector 0x100, TotalSectors 0xA80.

INFO: StartLogBlkAddr=0x14,  EndLogBlkAddr=0x3D

INFO: dwNkRamStart=0xA0200000,  dwImageStart=0x91580000

##########################################

INFO: Loading of NK completed successfully.

OEMLaunch::use BootCFG -> dwImageStart = 0x91580000, dwLaunchAddr = 0x80200000, dwImageLength = 0x2C0000

Download successful!  Jumping to image at 0x80200000 (physical 0x80200000)...

EbootWDOG_EnቱRO:OALLogSetZones: dpCurSettings.ulZoneMask: 0xb

BSP Clock Configuration:

    MCU PLL  = 532000000 Hz

    USB PLL  = 240000000 Hz

    ARM CLOCK  = 399000000 Hz

    AHB CLOCK  = 133000000 Hz

    IPG CLOCK  = 66500000 Hz

    USB CLOCK = 60000000 Hz

    Periph Clk CSI = 66500000 Hz

    Periph Clk EPIT = 66500000 Hz

    Periph Clk ESAI = 66500000 Hz

    Periph Clk ESDHC1 = 66500000 Hz

    Periph Clk ESDHC2 = 66500000 Hz

    Periph Clk GPT = 66500000 Hz

    Periph Clk I2C = 66500000 Hz

    Periph Clk LCDC = 66500000 Hz

    Periph Clk NFC = 33250000 Hz

    Periph Clk OWIRE = 66500000 Hz

    Periph Clk PWM = 66500000 Hz

    Periph Clk SIM1 = 66500000 Hz

    Periph Clk SIM2 = 66500000 Hz

    Periph Clk SSI1 = 66500000 Hz

    Periph Clk SSI2 = 66500000 Hz

    Periph Clk UART = 66500000 Hz

Windows CE Kernel for ARM (Thumb Enabled) Built on Nov  3 2010 at 07:30:04

INFO:OALLogSetZones: dpCurSetХͭzUU֮er On Reset

OEMInit:  silicon rev = 0x2

+OALInitRTC

OALInitRTC::Setup GPIO based I2C interface for ISL1208

dry ice initial status 0x103

dry ice status 0x3

RTC not running. turning it on now

-OEMInit

OALIoCtlHalPostInit::InitializeCriticalSection(&g_oalNfcMutex)

+RefreshWatchdogTimer: First call, init the Wdog to timeout reset in 10 secs

-->WdogInit:  Watchdog

ISL1208SetRealTime: OK 2006-1-1

OALIoCtlHalInitRTC(2006-1-1 12:0:0)

FMD_Init::0

FMD_Init::NumberOfChip=1

NANDDisk: d_StartBlock = 0x10, d_TotalSize = 0x23c0000 bytes.

Flash PDD: Init()

FlashPdd_Init: m_dwRegionNumber = 1.

<-Flash PDD: Init() OK

GpioAlloc passed!

IomuxAlloc passed!

ClockAlloc passed!

I2C_Init +

I2C_Init - hDev=0xd04f82a0

->ADC_Init

<-ADC_Init 0xd04f88e0

ISA_Init +

ISA_Init - hDev=0xd04f9540

->RNGB_GetRandomData

FEC: +DriverEntry(0xD04FC460, 0xD04FC470)

FEC: -DriverEntry [0x00000000]

FEC: +FECInitialize

BSPFECMacAddress: d0-9b-05-00-00-21

FEC: +FECEnetInit

CS&ZHL::BSPFECIomuxConfig 1

BSPPhyEnable::EM9170

BSPPhyReset:: Reset DM9161A

FEC: +FECParseDM9161State

FEC: 10Mbps Full Duplex

FEC: 10Mbps Half Duplex

FEC: 100Mbps Full Duplex

FEC: 100Mbps Half Duplex

BKL_INIT() +!

BKL_INIT() -!

SPI_Init +

--->CspiInitialize

CspiInitialize: DMA enabled (Base: 0x50004000)

CspiInitialize: DMA enabled (Base: 0x50004000)

SPI_Init: CSPI index = 3, pCspi=0xd08f0a00

SerInit+

SerInit - Initialization OK

SerInit+

SerInit - Initialization OK

SerInit+

SerInit - Initialization OK

SerInit+

SerInit - Initialization OK

ExSerInit::quit COM6 driver installation.

ExSerInit::quit COM7 driver installation.

ExSerInit::quit COM8 driver installation.

ExSerInit::quit COM9 driver installation.

->CAN_Init::flexcan driver

<-CAN_Init - hDev=0xd08f74e0

->CAN_Init::flexcan driver

<-CAN_Init - hDev=0xd08f66a0

WDT_Init +

InitializeHost2Mux::USBH2_OC <- pin-PWM in EM9170

ConfigUSBH2::polarity of USBH2 overcurrent is HIGH active

ConfigUSBH2::The USBPWR and OC pins are not used by USBH2

USB HardwareInitialize -> 0xd0bd0000

BspESDHCInit::config SD1 pins.

Config XVC as Dev

->IRQ_Init

<-IRQ_Init:: IrqNo=69, SysIntr=30

->IRQ_Init

IRQ_Init::failed to read TrueInstall.

->BSPInitLCDC

BSPInitLCDC:: PanelTyepe5 -> 800*600

GetVMemSizeFromRegistry: succeeds, size is 9437184!

LayMgr.cpp: Layout Manager successfully initialized to  1

+Touch screen Init

Maximum Allowed Error 16:

Install NandFlash2...

Flash PDD: Init()

FlashPdd_Init: m_dwRegionNumber = 2.

<-Flash PDD: Init() OK

ActivateDevice success.


EM9170 Emtronix Built at Jan  6 2015 10:38:05

Adaptation performed by Emtronix (c)


 AdapterName: FEC1

 EM9170 Debug Mode 

Explorer(V2.0) taskbar thread started.

NDISPWR:: Found adapter [FEC1]

AUTORAS:: Dialer notifies: [1] [Dialer Start]

Posting WM_NETCONNECT(TRUE) message

AUTORAS:: Dialer notifies: [4] [Dialer Connected]

GetUserInfoFile: no qualified userinfo.txt in flash!

SetMemoryDivision : invalid StorePercent

\USBDisk\autotest.txt file isnot exist!

IOCTL_HAL_WSTARTUP_END: wstartup is ended!



  单帖管理 | 引用 | 回复 回到顶部
帅哥哟,离线,有人找我吗?
MOMO
  2楼 | 信息 | 搜索 | 邮箱 | 主页


加好友 发短信
等级:新手上路
  发帖心情 Post By:2017-9-22 22:10:00 [只看该作者]

补充:烧入splash800600.nb0(看文档说缺省值是这个参数)


  单帖管理 | 引用 | 回复 回到顶部
帅哥哟,离线,有人找我吗?
MOMO
  3楼 | 信息 | 搜索 | 邮箱 | 主页


加好友 发短信
等级:新手上路
  发帖心情 Post By:2017-9-23 12:57:00 [只看该作者]

已解决。


  单帖管理 | 引用 | 回复 回到顶部
客人
  4楼


  发帖心情 Post By:2017-9-25 14:14:00 [只看该作者]

图片点击可在新窗口打开查看


  单帖管理 | 引用 | 回复 回到顶部

返回版面帖子列表

求助:EM9170的VGA不能用,有什么要求吗

用户名:          
内容:
               签名