sdled99
Post By£º2011-8-16 10:50:00 [Ö»¿´¸Ã×÷Õß]
RomBOOT
Nand flash enable periph clock
FirstBoot2::HY27US0812 64MB
Start eboot...
Master Clock is 47928517 HzÿDebug Serial Initialized
Microsoft Windows CE Ethernet Bootloader Common Library Version 1.1 Built Jul 6
2011 16:23:34
WinCE Ethernet Bootloader 1.7 for the EM9X60 boards (built Jul 7 2011)
Adaptation performed by EMTRONIX (c) 2009
RST_STATE = 0
RST_STATE = 0
->LLD_InitNandChipset K9F5608U0D
---------------------------------------
--- Configuring Chip Select 3 ---
--------------------------------
--- Desired timings ---
---------------------------------------
dwNWE_SETUP 20
dwNCS_WR_SETUP 10
dwNRD_SETUP 20
dwNCS_RD_SETUP 10
dwNWE_PULSE 40
dwNCS_WR_PULSE 70
dwNRD_PULSE 60
dwNCS_RD_PULSE 70
dwNRD_CYCLE 90
dwNWE_CYCLE 90
dwClockPeriod_ns 16
---------------------------------------
--- Real timings ---
---------------------------------------
dwNWE_SETUP 32
dwNCS_WR_SETUP 16
dwNRD_SETUP 32
dwNCS_RD_SETUP 16
dwNWE_PULSE 48
dwNCS_WR_PULSE 80
dwNRD_PULSE 64
dwNCS_RD_PULSE 80
dwNRD_CYCLE 112
dwNWE_CYCLE 112
->LLD_InitNandChipset K9F5608U0D
Master Clock is 59910656 Hz
---------------------------------------
--- Configuring Chip Select 3 ---
---------------------------------------
--- Desired timings ---
---------------------------------------
dwNWE_SETUP 20
dwNCS_WR_SETUP 10
dwNRD_SETUP 20
dwNCS_RD_SETUP 10
dwNWE_PULSE 40
dwNCS_WR_PULSE 70
dwNRD_PULSE 60
dwNCS_RD_PULSE 70
dwNRD_CYCLE 90
dwNWE_CYCLE 90
dwClockPeriod_ns 16
---------------------------------------
--- Real timings ---
---------------------------------------
dwNWE_SETUP 32
dwNCS_WR_SETUP 16
dwNRD_SETUP 32
dwNCS_RD_SETUP 16
dwNWE_PULSE 48
dwNCS_WR_PULSE 80
dwNRD_PULSE 64
dwNCS_RD_PULSE 80
dwNRD_CYCLE 112
dwNWE_CYCLE 112
Nand Flash correctly Initialized
WDTC_WDMR = 3FFF2FFF
WDTC_WDMR = 8000
Press [ENTER] to launch image stored in flash or [SPACE] to cancel.
Initiating image launch in 0 seconds. System ready!
Preparing for download...
memset 80067000 len=1b6fed4IsValidBlock_Sect : Invalid block
FMD_DirectRead - OEMReadImgFromFlash - Addr = 24000
Download successful! Jumping to image at 0x80068000 (physical 0x20068000)...
Windows CE Kernel for ARM (Thumb Enabled) Built on Aug 4 2008 at 18:38:38
ProcessorType=0926 Revision=5
sp_abt=ffff5000 sp_irq=ffff2800 sp_undef=ffffc800 OEMAddressTable = 80068020
+OALIntrInit
+OALIntrMapInit
-OALIntrMapInit
+SOCPioIntrInit()
-SOCPioIntrInit()
+OALIntrStaticTranslate(17, 21)
-OALIntrStaticTranslate
-OALIntrInit(rc = 1)
Initialize driver globals Zeros area...
pDrvGlobalArea 0x80058000 size 0x800 (0x80058800 -0x80058000)
---------------------------------------
--- Configuring Chip Select 1 ---
---------------------------------------
--- Desired timings ---
---------------------------------------
dwNWE_SETUP 0
dwNCS_WR_SETUP 0
dwNRD_SETUP 0
dwNCS_RD_SETUP 0
dwNWE_PULSE 0
dwNCS_WR_PULSE 0
dwNRD_PULSE 0
dwNCS_RD_PULSE 0
dwNRD_CYCLE 0
dwNWE_CYCLE 0
dwClockPeriod_ns 7
---------------------------------------
--- Real timings ---
---------------------------------------
dwNWE_SETUP 0
dwNCS_WR_SETUP 0
dwNRD_SETUP 0
dwNCS_RD_SETUP 0
dwNWE_PULSE 0
dwNCS_WR_PULSE 0
dwNRD_PULSE 0
dwNCS_RD_PULSE 0
dwNRD_CYCLE 0
dwNWE_CYCLE 0
OALTimerInit
+OALTimerInit
Master Clock is 133339592 Hz
Test : 0x208d
g_oalTimer.msecPerSysTick : 0x1
g_oalTimer.countsPerMSec : 0x208d
g_oalTimer.countsMargin : 0x0
g_oalTimer.maxPeriodMSec : 0x7c
g_oalTimer.countsPerSysTick : 0x208d
g_oalTimer.actualMSecPerSysTick : 0x1
g_oalTimer.actualCountsPerSysTick : 0x208d
g_oalTimer.curCounts : 0x0
Master Clock is 133339592 Hz
-OALTimerInit
pDrvGlobalArea->bEboot == TRUE. Forcing Clean Object store
+OEMPowerManagerInit
-OEMPowerManagerInit
OALKitlStart
force clean (@0x81c384f4 = 0x1) = TRUE
EM9X60 Init
Master Clock is 133339592 Hz
---------------------------------------
--- Configuring Chip Select 5 ---
---------------------------------------
--- Desired timings ---
---------------------------------------
dwNWE_SETUP 50
dwNCS_WR_SETUP 30
dwNRD_SETUP 50
dwNCS_RD_SETUP 30
dwNWE_PULSE 420
dwNCS_WR_PULSE 440
dwNRD_PULSE 420
dwNCS_RD_PULSE 440
dwNRD_CYCLE 500
dwNWE_CYCLE 500
dwClockPeriod_ns 7
---------------------------------------
--- Real timings ---
---------------------------------------
dwNWE_SETUP
dwNCS_WR_SETUP 35
dwNRD_SETUP 56
dwNCS_RD_SETUP 35
dwNWE_PULSE 420
dwNCS_WR_PULSE 441
dwNRD_PULSE 420
dwNCS_RD_PULSE 441
dwNRD_CYCLE 511
dwNWE_CYCLE 511
->EM9160 Features Setup
EM9x60 Valid Check Passed
EM9x60 Platform Check LCD...Type = 5, Started
+OEMInitWatchDogTimer
AT91SAM926x_DispWatchDog 8000!
OEMInit::pause WDT refresh
Sp=ffffc7cc
OEMIoControl: Unsupported Code 0x10100b4 - device 0x0101 func 45
+OALIoCtlHalInitRTC(...)
OALIoCtlHalInitRTC::GPBR0=0x507c9570, GPBR1=0xbb8, GPBR2=
OEMIoControl: Unsupported Code 0x101008c - device 0x0101 func 35
->FMD_Init +SoftECC
->LLD_Init::Small Sector NandChip
+OALIntrRequestSysIntr(1, 0x8d, 0x00000000)
-OALIntrRequestSysIntr(sysIntr = 16)
Master Clock is 133339592 Hz
---------------------------------------
--- Configuring Chip Select 3 ---
---------------------------------------
--- Desired timings ---
---------------------------------------
dwNWE_SETUP 20
dwNCS_WR_SETUP 10
dwNRD_SETUP 20
dwNCS_RD_SETUP 10
dwNWE_PULSE
dwNCS_WR_PULSE 70
dwNRD_PULSE 60
dwNCS_RD_PULSE 70
dwNRD_CYCLE 90
dwNWE_CYCLE 90
dwClockPeriod_ns 7
---------------------------------------
--- Real timings ---
---------------------------------------
dwNWE_SETUP 21
dwNCS_WR_SETUP 14
dwNRD_SETUP 21
dwNCS_RD_SETUP 14
dwNWE_PULSE 42
dwNCS_WR_PULSE 70
dwNRD_PULSE 63
dwNCS_RD_PULSE 70
dwNRD_CYCLE 98
dwNWE_CYCLE 98
+OALIntrReleaseSysIntr(16)
-OALIntrReleaseSysIntr(rc = 1)
->LLD_Init::Small Sector N
+OALIntrRequestSysIntr(1, 0x8d, 0x00000000)
-OALIntrRequestSysIntr(sysIntr = 16)
Master Clock is 133339592 Hz
---------------------------------------
--- Configuring Chip Select 3 ---
---------------------------------------
--- Desired timings ---
---------------------------------------
dwNWE_SETUP 20
dwNCS_WR_SETUP 10
dwNRD_SETUP 20
dwNCS_RD_SETUP 10
dwNWE_PULSE 40
dwNCS_WR_PULSE 70
dwNRD_PULSE 60
dwNCS_RD_PULSE 70
dwNRD_CYCLE 90
dwNWE_CYCLE 90
dwClockPeri
---------------------------------------
--- Real timings ---
---------------------------------------
dwNWE_SETUP 21
dwNCS_WR_SETUP 14
dwNRD_SETUP 21
dwNCS_RD_SETUP 14
dwNWE_PULSE 42
dwNCS_WR_PULSE 70
dwNRD_PULSE 63
dwNCS_RD_PULSE 70
dwNRD_CYCLE 98
dwNWE_CYCLE 98
OEMIoControl: Unsupported Code 0x10100c4 - device 0x0101 func 49
OEMIoControl: Unsupported Code 0x10100c4 - device 0x0101 func 49
SPIDriver - SPI_Init - Context: Drivers\Active\03
Quit Install SPI
SPI_Init - Failed to load registry (CS)
SPIDriver - SPI_Init - Context: Drivers\Active\04
Quit Install SPI
SPI_Init - Failed to load registry (CS)
SPIDriver - SPI_Init - Context: Drivers\Active\05
Quit Install SPI
SPI_Init - Failed to load registry (CS)
SPIDriver - SPI_Init - Context: Drivers\Active\06
Quit Install SPI
SPI_Init - Failed to load registry (CS)
OEMIoControl: Unsupported Code 0x10100d0 - device 0x0101 func 52
OEMIoControl: Unsupported Code 0x10100f8 - device 0x0101 func 62
Loading WinCE driver for AT
Using registry ethernet configuration
-->EDeviceInitialize(0)
EM9160 PA2 as PHY Hardware Reset
PHY ID : 181b8b1
Always begin with Autonegotiation...
PHY_GetConfiguration : autoneg not complete
PHY_GetConfiguration : autoneg is completed!
EMAC Init: 100 Mbps FULL DUPLEX (MII)
+OALIntrRequestSysIntr(1, 0x15, 0x00000008)
-OALIntrRequestSysIntr(sysIntr = 17)
+OALIntrRequestSysIntr(1, 0xa, 0x00000000)
-OALIntrRequestSysIntr(sysIntr = 18)
+OALIntrRequestSysIntr(1, 0x85, 0x00000000)
-OALIntrRequestSysIntr(sysIntr = 19)
Master Clock is 133339592 Hz
DeviceFolder::LoadDevice!Enumerate Found deprecated load instructions at (Driver
s\BuiltIn\AFD). Driver cannot be unloaded.
+OALIntrRequestSysIntr(1, 0x6, 0x00000
000)
-OALIntrRequestSysIntr(sysIntr = 20)
Master Clock is 133339592 Hz
+OALIntrRequestSysIntr(1, 0x8, 0x00000000)
-OALIntrRequestSysIntr(sysIntr = 21)
Master Clock is 133339592 Hz
+OALIntrRequestSysIntr(1, 0x7, 0x00000000)
-OALIntrRequestSysIntr(sysIntr = 22)
Master Clock is 13333959
+OALIntrRequestSysIntr(1, 0x17, 0x00000000)
-OALIntrRequestSysIntr(sysIntr = 23)
Master Clock is 133339592 Hz
+OALIntrRequestSysIntr(1, 0x19, 0x00000000)
-OALIntrRequestSysIntr(sysIntr = 24)
Master Clock is 133339592 Hz
+OALIntrRequestSysIntr(1, 0x18, 0x00000000)
-OALIntrRequestSysIntr(sysIntr = 25)
Master Clock is 133339592 Hz
DeviceFolder::LoadDevice!Enumerate Found deprecated load instructions at (Driver
s\BuiltIn\PPP). Driver cannot be unloaded.
DeviceFolder::LoadDevi
nd deprecated load instructions at (Drivers\BuiltIn\SNMP). Driver cannot be unlo
aded.
USB:OhcdPdd_Init
++InitializeOHCI
+OALIntrRequestSysIntr(1, 0x14, 0x00000000)
-OALIntrRequestSysIntr(sysIntr = 26)
--InitializeOHCI
ExSerInit::quit COM8 driver installation.
Hardware doesn<|>t init correctly, COM_Init failed
ExSerInit::quit COM9 driver installation.
Hardware doesn<|>t init correctly, COM_Init failed
+-->PWM_Init
+OALIntrRequestSysIntr(1, 0x1a, 0x00000000)
-OALIntrRequestSysIntr(sysIntr = 27)
+OALIntrRequestSysIntr(1, 0x1b, 0x00000000)
-OALIntrRequestSysIntr(sysIntr = 28)
+OALIntrRequestSysIntr(1, 0x1c, 0x00000000)
-OALIntrRequestSysIntr(sysIntr = 29)
Master Clock is 133339592 Hz
ExSerInit::quit COM10 driver installation.
Hardware doesn<|>t init correctly, COM_Init failed
ExSerInit::quit COM11 driver installation.
Hardware doesn<|>t init correctly, COM_Init failed
ExSerInit::quit COM12 driver installation.
Hardware doesn<|>t init correctly, COM_Init failed
ExSerInit::quit COM13 driver installation.
Hardware doesn<|>t init correctly, COM_Init failed
ExSerInit::quit COM14 driver installation.
Hardware doesn<|>t init correctly, COM_Init failed
ExSerInit::quit COM15 driver installation.
Hardware doesn<|>t init correctly, COM_Init failed
cable attached
-->EMACB::DeviceReset
-->EDeviceInitialize(1)
PHY ID : 181b8b1
Always begin with Autonegotiation...
PHY_GetConfiguration : autoneg is completed!
+OALIntrRequestSysIntr(1, 0x1e, 0x00000000)
-OALIntrRequestSysIntr(sysIntr = 30)
+OALIntrRequestSysIntr(1, 0x1d, 0x00000000)
-OALIntrRequestSysIntr(sysIntr = 31)
OEMIoControl: Unsupported Code 0x10100fc - device 0x0101 func 63
PHY_GetConfiguration : autoneg is completed!
EMAC Init: 100 Mbps FULL DUPLEX (MII)
EM9160 Emtronix Built at Jul 7 2011 11:14:22
Adaptation performed by Emtronix (c)
wstartup::resume WDT refresh 1
AdapterName: EMACB1Explorer(V2.0) taskbar thread started.
NDISPWR:: Found adapter [EMACB1]
CopyFile: 0
RegOpenKeyEx Comm\EMACB1 0
IPAddr: 192.168.201.205 SubnetMask: 255.255.255.0 Gateway: 192.168.201.8
FileName:\NandFlash\dbginfo.txt
CreatFile 839D84A6
File bResult=1 nBytes=190
DHCP Disable
IP Parameters aren<|>t changed, need not set AdapterIPProperties
autotest.txt file isnot exist!
Nand flash enable periph clock
FirstBoot2::HY27US0812 64MB
Start eboot...
Master Clock is 47928517 HzÿDebug Serial Initialized
Microsoft Windows CE Ethernet Bootloader Common Library Version 1.1 Built Jul 6
2011 16:23:34
WinCE Ethernet Bootloader 1.7 for the EM9X60 boards (built Jul 7 2011)
Adaptation performed by EMTRONIX (c) 2009
RST_STATE = 0
RST_STATE = 0
->LLD_InitNandChipset K9F5608U0D
---------------------------------------
--- Configuring Chip Select 3 ---
--------------------------------
--- Desired timings ---
---------------------------------------
dwNWE_SETUP 20
dwNCS_WR_SETUP 10
dwNRD_SETUP 20
dwNCS_RD_SETUP 10
dwNWE_PULSE 40
dwNCS_WR_PULSE 70
dwNRD_PULSE 60
dwNCS_RD_PULSE 70
dwNRD_CYCLE 90
dwNWE_CYCLE 90
dwClockPeriod_ns 16
---------------------------------------
--- Real timings ---
---------------------------------------
dwNWE_SETUP 32
dwNCS_WR_SETUP 16
dwNRD_SETUP 32
dwNCS_RD_SETUP 16
dwNWE_PULSE 48
dwNCS_WR_PULSE 80
dwNRD_PULSE 64
dwNCS_RD_PULSE 80
dwNRD_CYCLE 112
dwNWE_CYCLE 112
->LLD_InitNandChipset K9F5608U0D
Master Clock is 59910656 Hz
---------------------------------------
--- Configuring Chip Select 3 ---
---------------------------------------
--- Desired timings ---
---------------------------------------
dwNWE_SETUP 20
dwNCS_WR_SETUP 10
dwNRD_SETUP 20
dwNCS_RD_SETUP 10
dwNWE_PULSE 40
dwNCS_WR_PULSE 70
dwNRD_PULSE 60
dwNCS_RD_PULSE 70
dwNRD_CYCLE 90
dwNWE_CYCLE 90
dwClockPeriod_ns 16
---------------------------------------
--- Real timings ---
---------------------------------------
dwNWE_SETUP 32
dwNCS_WR_SETUP 16
dwNRD_SETUP 32
dwNCS_RD_SETUP 16
dwNWE_PULSE 48
dwNCS_WR_PULSE 80
dwNRD_PULSE 64
dwNCS_RD_PULSE 80
dwNRD_CYCLE 112
dwNWE_CYCLE 112
Nand Flash correctly Initialized
WDTC_WDMR = 3FFF2FFF
WDTC_WDMR = 8000
Press [ENTER] to launch image stored in flash or [SPACE] to cancel.
Initiating image launch in 0 seconds. System ready!
Preparing for download...
memset 80067000 len=1b6fed4IsValidBlock_Sect : Invalid block
FMD_DirectRead - OEMReadImgFromFlash - Addr = 24000
Download successful! Jumping to image at 0x80068000 (physical 0x20068000)...
Windows CE Kernel for ARM (Thumb Enabled) Built on Aug 4 2008 at 18:38:38
ProcessorType=0926 Revision=5
sp_abt=ffff5000 sp_irq=ffff2800 sp_undef=ffffc800 OEMAddressTable = 80068020
+OALIntrInit
+OALIntrMapInit
-OALIntrMapInit
+SOCPioIntrInit()
-SOCPioIntrInit()
+OALIntrStaticTranslate(17, 21)
-OALIntrStaticTranslate
-OALIntrInit(rc = 1)
Initialize driver globals Zeros area...
pDrvGlobalArea 0x80058000 size 0x800 (0x80058800 -0x80058000)
---------------------------------------
--- Configuring Chip Select 1 ---
---------------------------------------
--- Desired timings ---
---------------------------------------
dwNWE_SETUP 0
dwNCS_WR_SETUP 0
dwNRD_SETUP 0
dwNCS_RD_SETUP 0
dwNWE_PULSE 0
dwNCS_WR_PULSE 0
dwNRD_PULSE 0
dwNCS_RD_PULSE 0
dwNRD_CYCLE 0
dwNWE_CYCLE 0
dwClockPeriod_ns 7
---------------------------------------
--- Real timings ---
---------------------------------------
dwNWE_SETUP 0
dwNCS_WR_SETUP 0
dwNRD_SETUP 0
dwNCS_RD_SETUP 0
dwNWE_PULSE 0
dwNCS_WR_PULSE 0
dwNRD_PULSE 0
dwNCS_RD_PULSE 0
dwNRD_CYCLE 0
dwNWE_CYCLE 0
OALTimerInit
+OALTimerInit
Master Clock is 133339592 Hz
Test : 0x208d
g_oalTimer.msecPerSysTick : 0x1
g_oalTimer.countsPerMSec : 0x208d
g_oalTimer.countsMargin : 0x0
g_oalTimer.maxPeriodMSec : 0x7c
g_oalTimer.countsPerSysTick : 0x208d
g_oalTimer.actualMSecPerSysTick : 0x1
g_oalTimer.actualCountsPerSysTick : 0x208d
g_oalTimer.curCounts : 0x0
Master Clock is 133339592 Hz
-OALTimerInit
pDrvGlobalArea->bEboot == TRUE. Forcing Clean Object store
+OEMPowerManagerInit
-OEMPowerManagerInit
OALKitlStart
force clean (@0x81c384f4 = 0x1) = TRUE
EM9X60 Init
Master Clock is 133339592 Hz
---------------------------------------
--- Configuring Chip Select 5 ---
---------------------------------------
--- Desired timings ---
---------------------------------------
dwNWE_SETUP 50
dwNCS_WR_SETUP 30
dwNRD_SETUP 50
dwNCS_RD_SETUP 30
dwNWE_PULSE 420
dwNCS_WR_PULSE 440
dwNRD_PULSE 420
dwNCS_RD_PULSE 440
dwNRD_CYCLE 500
dwNWE_CYCLE 500
dwClockPeriod_ns 7
---------------------------------------
--- Real timings ---
---------------------------------------
dwNWE_SETUP
dwNCS_WR_SETUP 35
dwNRD_SETUP 56
dwNCS_RD_SETUP 35
dwNWE_PULSE 420
dwNCS_WR_PULSE 441
dwNRD_PULSE 420
dwNCS_RD_PULSE 441
dwNRD_CYCLE 511
dwNWE_CYCLE 511
->EM9160 Features Setup
EM9x60 Valid Check Passed
EM9x60 Platform Check LCD...Type = 5, Started
+OEMInitWatchDogTimer
AT91SAM926x_DispWatchDog 8000!
OEMInit::pause WDT refresh
Sp=ffffc7cc
OEMIoControl: Unsupported Code 0x10100b4 - device 0x0101 func 45
+OALIoCtlHalInitRTC(...)
OALIoCtlHalInitRTC::GPBR0=0x507c9570, GPBR1=0xbb8, GPBR2=
OEMIoControl: Unsupported Code 0x101008c - device 0x0101 func 35
->FMD_Init +SoftECC
->LLD_Init::Small Sector NandChip
+OALIntrRequestSysIntr(1, 0x8d, 0x00000000)
-OALIntrRequestSysIntr(sysIntr = 16)
Master Clock is 133339592 Hz
---------------------------------------
--- Configuring Chip Select 3 ---
---------------------------------------
--- Desired timings ---
---------------------------------------
dwNWE_SETUP 20
dwNCS_WR_SETUP 10
dwNRD_SETUP 20
dwNCS_RD_SETUP 10
dwNWE_PULSE
dwNCS_WR_PULSE 70
dwNRD_PULSE 60
dwNCS_RD_PULSE 70
dwNRD_CYCLE 90
dwNWE_CYCLE 90
dwClockPeriod_ns 7
---------------------------------------
--- Real timings ---
---------------------------------------
dwNWE_SETUP 21
dwNCS_WR_SETUP 14
dwNRD_SETUP 21
dwNCS_RD_SETUP 14
dwNWE_PULSE 42
dwNCS_WR_PULSE 70
dwNRD_PULSE 63
dwNCS_RD_PULSE 70
dwNRD_CYCLE 98
dwNWE_CYCLE 98
+OALIntrReleaseSysIntr(16)
-OALIntrReleaseSysIntr(rc = 1)
->LLD_Init::Small Sector N
+OALIntrRequestSysIntr(1, 0x8d, 0x00000000)
-OALIntrRequestSysIntr(sysIntr = 16)
Master Clock is 133339592 Hz
---------------------------------------
--- Configuring Chip Select 3 ---
---------------------------------------
--- Desired timings ---
---------------------------------------
dwNWE_SETUP 20
dwNCS_WR_SETUP 10
dwNRD_SETUP 20
dwNCS_RD_SETUP 10
dwNWE_PULSE 40
dwNCS_WR_PULSE 70
dwNRD_PULSE 60
dwNCS_RD_PULSE 70
dwNRD_CYCLE 90
dwNWE_CYCLE 90
dwClockPeri
---------------------------------------
--- Real timings ---
---------------------------------------
dwNWE_SETUP 21
dwNCS_WR_SETUP 14
dwNRD_SETUP 21
dwNCS_RD_SETUP 14
dwNWE_PULSE 42
dwNCS_WR_PULSE 70
dwNRD_PULSE 63
dwNCS_RD_PULSE 70
dwNRD_CYCLE 98
dwNWE_CYCLE 98
OEMIoControl: Unsupported Code 0x10100c4 - device 0x0101 func 49
OEMIoControl: Unsupported Code 0x10100c4 - device 0x0101 func 49
SPIDriver - SPI_Init - Context: Drivers\Active\03
Quit Install SPI
SPI_Init - Failed to load registry (CS)
SPIDriver - SPI_Init - Context: Drivers\Active\04
Quit Install SPI
SPI_Init - Failed to load registry (CS)
SPIDriver - SPI_Init - Context: Drivers\Active\05
Quit Install SPI
SPI_Init - Failed to load registry (CS)
SPIDriver - SPI_Init - Context: Drivers\Active\06
Quit Install SPI
SPI_Init - Failed to load registry (CS)
OEMIoControl: Unsupported Code 0x10100d0 - device 0x0101 func 52
OEMIoControl: Unsupported Code 0x10100f8 - device 0x0101 func 62
Loading WinCE driver for AT
Using registry ethernet configuration
-->EDeviceInitialize(0)
EM9160 PA2 as PHY Hardware Reset
PHY ID : 181b8b1
Always begin with Autonegotiation...
PHY_GetConfiguration : autoneg not complete
PHY_GetConfiguration : autoneg is completed!
EMAC Init: 100 Mbps FULL DUPLEX (MII)
+OALIntrRequestSysIntr(1, 0x15, 0x00000008)
-OALIntrRequestSysIntr(sysIntr = 17)
+OALIntrRequestSysIntr(1, 0xa, 0x00000000)
-OALIntrRequestSysIntr(sysIntr = 18)
+OALIntrRequestSysIntr(1, 0x85, 0x00000000)
-OALIntrRequestSysIntr(sysIntr = 19)
Master Clock is 133339592 Hz
DeviceFolder::LoadDevice!Enumerate Found deprecated load instructions at (Driver
s\BuiltIn\AFD). Driver cannot be unloaded.
+OALIntrRequestSysIntr(1, 0x6, 0x00000
000)
-OALIntrRequestSysIntr(sysIntr = 20)
Master Clock is 133339592 Hz
+OALIntrRequestSysIntr(1, 0x8, 0x00000000)
-OALIntrRequestSysIntr(sysIntr = 21)
Master Clock is 133339592 Hz
+OALIntrRequestSysIntr(1, 0x7, 0x00000000)
-OALIntrRequestSysIntr(sysIntr = 22)
Master Clock is 13333959
+OALIntrRequestSysIntr(1, 0x17, 0x00000000)
-OALIntrRequestSysIntr(sysIntr = 23)
Master Clock is 133339592 Hz
+OALIntrRequestSysIntr(1, 0x19, 0x00000000)
-OALIntrRequestSysIntr(sysIntr = 24)
Master Clock is 133339592 Hz
+OALIntrRequestSysIntr(1, 0x18, 0x00000000)
-OALIntrRequestSysIntr(sysIntr = 25)
Master Clock is 133339592 Hz
DeviceFolder::LoadDevice!Enumerate Found deprecated load instructions at (Driver
s\BuiltIn\PPP). Driver cannot be unloaded.
DeviceFolder::LoadDevi
nd deprecated load instructions at (Drivers\BuiltIn\SNMP). Driver cannot be unlo
aded.
USB:OhcdPdd_Init
++InitializeOHCI
+OALIntrRequestSysIntr(1, 0x14, 0x00000000)
-OALIntrRequestSysIntr(sysIntr = 26)
--InitializeOHCI
ExSerInit::quit COM8 driver installation.
Hardware doesn<|>t init correctly, COM_Init failed
ExSerInit::quit COM9 driver installation.
Hardware doesn<|>t init correctly, COM_Init failed
+-->PWM_Init
+OALIntrRequestSysIntr(1, 0x1a, 0x00000000)
-OALIntrRequestSysIntr(sysIntr = 27)
+OALIntrRequestSysIntr(1, 0x1b, 0x00000000)
-OALIntrRequestSysIntr(sysIntr = 28)
+OALIntrRequestSysIntr(1, 0x1c, 0x00000000)
-OALIntrRequestSysIntr(sysIntr = 29)
Master Clock is 133339592 Hz
ExSerInit::quit COM10 driver installation.
Hardware doesn<|>t init correctly, COM_Init failed
ExSerInit::quit COM11 driver installation.
Hardware doesn<|>t init correctly, COM_Init failed
ExSerInit::quit COM12 driver installation.
Hardware doesn<|>t init correctly, COM_Init failed
ExSerInit::quit COM13 driver installation.
Hardware doesn<|>t init correctly, COM_Init failed
ExSerInit::quit COM14 driver installation.
Hardware doesn<|>t init correctly, COM_Init failed
ExSerInit::quit COM15 driver installation.
Hardware doesn<|>t init correctly, COM_Init failed
cable attached
-->EMACB::DeviceReset
-->EDeviceInitialize(1)
PHY ID : 181b8b1
Always begin with Autonegotiation...
PHY_GetConfiguration : autoneg is completed!
+OALIntrRequestSysIntr(1, 0x1e, 0x00000000)
-OALIntrRequestSysIntr(sysIntr = 30)
+OALIntrRequestSysIntr(1, 0x1d, 0x00000000)
-OALIntrRequestSysIntr(sysIntr = 31)
OEMIoControl: Unsupported Code 0x10100fc - device 0x0101 func 63
PHY_GetConfiguration : autoneg is completed!
EMAC Init: 100 Mbps FULL DUPLEX (MII)
EM9160 Emtronix Built at Jul 7 2011 11:14:22
Adaptation performed by Emtronix (c)
wstartup::resume WDT refresh 1
AdapterName: EMACB1Explorer(V2.0) taskbar thread started.
NDISPWR:: Found adapter [EMACB1]
CopyFile: 0
RegOpenKeyEx Comm\EMACB1 0
IPAddr: 192.168.201.205 SubnetMask: 255.255.255.0 Gateway: 192.168.201.8
FileName:\NandFlash\dbginfo.txt
CreatFile 839D84A6
File bResult=1 nBytes=190
DHCP Disable
IP Parameters aren<|>t changed, need not set AdapterIPProperties
autotest.txt file isnot exist!
