北京崇远公司
Post By：2010-8-9 8:56:00 [只看该作者]
您好，前段在您公司又购买了一款EM9260V9.3开发模块，现在有这么个问题，调试模式下编写的应用程序能运行，但是运行模式下编写的应用程序不能运行起来，配置文件不会写错的，是不是内核出问题了，另外目前不知为什么好像这块核心板不能正常播放MP3文件，就在上半年我公司购买同样一款EM9260，但是V9.0的好像是，当时是支持MP3播放的，DA板是我自己做的。请问我当前这块板能烧写V9.0的内核吗，如何烧写，请告诉我烧写方法，谢谢！
【以下附开机启动界面部分打印信息】
Press [ENTER] to launch image stored in flash or [SPACE] to cancel.
Initiating image launch in 0 seconds. System ready!
Preparing for download...
memset 80067000 len=1c8b7c0
FMD_DirectRead - OEMReadImgFromFlash - Addr = 60000
Download successful! Jumping to image at 0x80068000 (physical 0x20068000)...
]ス懡萃?亃暽箷眮櫧蓙I5仯ⅰ盏墎箙壉晳榨毖伣箒諠亙?拏偮
褋怕覛乱毬jR%綅曂徒
蒕辶曱率挷挄佶庭焦跽jR4羮厜氧殭櫃樟倐毩}ド捧矙櫃舍倐毩}展憰欟櫃櫃嶀羵z5憫蓵
屯Q厜睍侕聜偛聜拏j暪懡萃??ド递吷晛z1%寡蒑褏靴峇蓞雇眳褧5rjz1%寡?攻选蓫?
奐jR斿+嫢叡ラ晛懮ベ暽?R?<|>F哟 ?匨aster Clock is 90004387 Hz
---------------------------------------
--- Configuring Chip Select 1 ---
---------------------------------------
--- Desired timings ---
---------------------------------------
dwNWE_SETUP 0
dwNCS_WR_SETUP 0
dwNRD_SETUP 0
dwNCS_RD_SETUP 0
dwNWE_PULSE 0
dwNCS_WR_PULSE 0
dwNRD_PULSE 0
dwNCS_RD_PULSE 0
dwNRD_CYCLE 0
dwNWE_CYCLE 0
dwClockPeriod_ns 11
---------------------------------------
--- Real timings ---
---------------------------------------
dwNWE_SETUP 0
dwNCS_WR_SETUP 0
dwNRD_SETUP 0
dwNCS_RD_SETUP 0
dwNWE_PULSE 0
dwNCS_WR_PULSE 0
dwNRD_PULSE 0
dwNCS_RD_PULSE 0
dwNRD_CYCLE 0
dwNWE_CYCLE 0
OALTimerInit
+OALTimerInit
Master Clock is 90004387 Hz
Test : 0x15f9
g_oalTimer.msecPerSysTick : 0x1
g_oalTimer.countsPerMSec : 0x15f9
g_oalTimer.countsMargin : 0x0
g_oalTimer.maxPeriodMSec : 0xb9
g_oalTimer.countsPerSysTick : 0x15f9
g_oalTimer.actualMSecPerSysTick : 0x1
g_oalTimer.actualCountsPerSysTick : 0x15f9
g_oalTimer.curCounts : 0x0
Master Clock is 90004387 Hz
-OALTimerInit
pDrvGlobalArea->bEboot == TRUE. Forcing Clean Object store
+OEMPowerManagerInit
-OEMPowerManagerInit
avant OALKitlStart - force clean (@0x81d5c9d4 = 0x1) = TRUE
OALKitlStart
Firmware Init Done.
+OEMInitWatchDogTimer
AT91SAM926x_DispWatchDog 8000!
force clean (@0x81d5c9d4 = 0x1) = TRUE
EM9X60 Init
Master Clock is 90004387 Hz
---------------------------------------
--- Configuring Chip Select 5 ---
---------------------------------------
--- Desired timings ---
---------------------------------------
dwNWE_SETUP 50
dwNCS_WR_SETUP 30
dwNRD_SETUP 50
dwNCS_RD_SETUP 30
dwNWE_PULSE 420
dwNCS_WR_PULSE 440
dwNRD_PULSE 420
dwNCS_RD_PULSE 440
dwNRD_CYCLE 500
dwNWE_CYCLE 500
dwClockPeriod_ns 11
---------------------------------------
--- Real timings ---
---------------------------------------
dwNWE_SETUP 55
dwNCS_WR_SETUP 33
dwNRD_SETUP 55
dwNCS_RD_SETUP 33
dwNWE_PULSE 429
dwNCS_WR_PULSE 440
dwNRD_PULSE 429
dwNCS_RD_PULSE 440
dwNRD_CYCLE 517
dwNWE_CYCLE 517
->EM9260 Features Setup
EM9x60 Valid Check Passed
EM9x60 Platform Check WinCE
LCD...Type = 3, Started
Sp=ffffc7cc
OEMIoControl: Unsupported Code 0x10100b4 - device 0x0101 func 45
+OALIoCtlHalInitRTC(...)
OEMIoControl: Unsupported Code 0x101008c - device 0x0101 func 35
->LLD_InitNandChipset K9F5608U0D
+OALIntrRequestSysIntr(1, 0x8d, 0x00000000)
-OALIntrRequestSysIntr(sysIntr = 16)
Master Clock is 90004387 Hz
---------------------------------------
--- Configuring Chip Select 3 ---
---------------------------------------
--- Desired timings ---
---------------------------------------
dwNWE_SETUP 19
dwNCS_WR_SETUP 0
dwNRD_SETUP 19
dwNCS_RD_SETUP 0
dwNWE_PULSE 38
dwNCS_WR_PULSE 76
dwNRD_PULSE 38
dwNCS_RD_PULSE 76
dwNRD_CYCLE 76
dwNWE_CYCLE 76
dwClockPeriod_ns 11
---------------------------------------
--- Real timings ---
---------------------------------------
dwNWE_SETUP 22
dwNCS_WR_SETUP 0
dwNRD_SETUP 22
dwNCS_RD_SETUP 0
dwNWE_PULSE 44
dwNCS_WR_PULSE 77
dwNRD_PULSE 44
dwNCS_RD_PULSE 77
dwNRD_CYCLE 88
dwNWE_CYCLE 88
+OALIntrReleaseSysIntr(16)
-OALIntrReleaseSysIntr(rc = 1)
+OALIntrRequestSysIntr(1, 0x8d, 0x00000000)
-OALIntrRequestSysIntr(sysIntr = 16)
Master Clock is 90004387 Hz
---------------------------------------
--- Configuring Chip Select 3 ---
---------------------------------------
--- Desired timings ---
---------------------------------------
dwNWE_SETUP 10
dwNCS_WR_SETUP 0
dwNRD_SETUP 10
dwNCS_RD_SETUP 0
dwNWE_PULSE 30
dwNCS_WR_PULSE 40
dwNRD_PULSE 40
dwNCS_RD_PULSE 40
dwNRD_CYCLE 60
dwNWE_CYCLE 60
dwClockPeriod_ns 11
---------------------------------------
--- Real timings ---
---------------------------------------
dwNWE_SETUP 11
dwNCS_WR_SETUP 0
dwNRD_SETUP 11
dwNCS_RD_SETUP 0
dwNWE_PULSE 33
dwNCS_WR_PULSE 44
dwNRD_PULSE 44
dwNCS_RD_PULSE 44
dwNRD_CYCLE 66
dwNWE_CYCLE 66
FMD_GetBlockStatus::Logical block 0x225 is marked as bad
FMD_GetBlockStatus::Logical block 0x52C is marked as bad
OEMIoControl: Unsupported Code 0x10100c4 - device 0x0101 func 49
OEMIoControl: Unsupported Code 0x10100c4 - device 0x0101 func 49
SPIDriver - SPI_Init - Context: Drivers\Active\03
Quit SPI Driver Installation!
SPIDriver - SPI_Init - Context: Drivers\Active\04
Quit SPI Driver Installation!
SPIDriver - SPI_Init - Context: Drivers\Active\05
Quit SPI Driver Installation!
SPIDriver - SPI_Init - Context: Drivers\Active\06
Quit SPI Driver Installation!
CAN Driver, Compiled at May 27 2010 10:50:16
+OALIntrRequestSysIntr(1, 0x1d, 0x00000000)
-OALIntrRequestSysIntr(sysIntr = 18)
OEMIoControl: Unsupported Code 0x10100d0 - device 0x0101 func 52
OEMIoControl: Unsupported Code 0x10100f8 - device 0x0101 func 62
Loading WinCE driver for ATMEL EMACB controller
Using registry ethernet configuration
-->EDeviceInitialize(0)
Hardware Reset PHY
PHY ID : 181b881
PHY_GetConfiguration : autoneg not complete
PHY_WaitForAutonegociationComplete Autoneg not complete
Autonegociation failed
+OALIntrRequestSysIntr(1, 0x15, 0x00000008)
-OALIntrRequestSysIntr(sysIntr = 17)
USB:OhcdPdd_Init
++InitializeOHCI
+OALIntrRequestSysIntr(1, 0x14, 0x00000000)
-OALIntrRequestSysIntr(sysIntr = 19)
--InitializeOHCI
+OALIntrRequestSysIntr(1, 0xa, 0x00000000)
-OALIntrRequestSysIntr(sysIntr = 20)
+OALIntrRequestSysIntr(1, 0x85, 0x00000000)
-OALIntrRequestSysIntr(sysIntr = 21)
Master Clock is 90004387 Hz
Quit Audio Driver Installation!
[ERROR] "PDD_AudioInitialize() FAILED"
CAN Driver, Compiled at May 27 2010 10:50:16
CAN_Init::quit CAN2 driver installation.
DeviceFolder::LoadDevice!Enumerate Found deprecated load instructions at (Driver
s\BuiltIn\AFD). Driver cannot be unloaded.
+OALIntrRequestSysIntr(1, 0x6, 0x00000
000)
-OALIntrRequestSysIntr(sysIntr = 22)
Master Clock is 90004387 Hz
+OALIntrRequestSysIntr(1, 0x8, 0x00000000)
-OALIntrRequestSysIntr(sysIntr = 23)
Master Clock is 90004387 Hz
+OALIntrRequestSysIntr(1, 0x7, 0x00000000)
-OALIntrRequestSysIntr(sysIntr = 24)
Master Clock is 90004387 Hz
+OALIntrRequestSysIntr(1, 0x17, 0x00000000)
-OALIntrRequestSysIntr(sysIntr = 25)
Master Clock is 90004387 Hz
+OALIntrRequestSysIntr(1, 0x19, 0x00000000)
-OALIntrRequestSysIntr(sysIntr = 26)
Master Clock is 90004387 Hz
+OALIntrRequestSysIntr(1, 0x18, 0x00000000)
-OALIntrRequestSysIntr(sysIntr = 27)
Master Clock is 90004387 Hz
DeviceFolder::LoadDevice!Enumerate Found deprecated load instructions at (Driver
s\BuiltIn\PPP). Driver cannot be unloaded.
ExSerInit::quit COM8 driver installati
on.
Hardware doesn<|>t init correctly, COM_Init failed
-->EMACB::DeviceReset
ExSerInit::quit COM9 driver installation.
Hardware doesn<|>t init correctly, COM_Init failed
ExSerInit::quit COM10 driver installation.
Hardware doesn<|>t init correctly, COM_Init failed
ExSerInit::quit COM11 driver installation.
Hardware doesn<|>t init correctly, COM_Init failed
ExSerInit::quit COM12 driver installation.
Hardware doesn<|>t init correctly, COM_Init failed
ExSerInit::quit COM13 driver installation.
Hardware doesn<|>t init correctly, COM_Init failed
ExSerInit::quit COM14 driver installation.
Hardware doesn<|>t init correctly, COM_Init failed
ExSerInit::quit COM15 driver installation.
Hardware doesn<|>t init correctly, COM_Init failed
+OALIntrRequestSysIntr(1, 0x1e, 0x00000000)
-OALIntrRequestSysIntr(sysIntr = 28)
OEMIoControl: Unsupported Code 0x10100fc - device 0x0101 func 63
EM9X60 built at May 27 2010 10:52:05
Adaptation performed by Emtronix (c)
AdapterName: EMACB1-->EMACB::DeviceReset
Explorer(V2.0) taskbar thread started.
NDISPWR:: Found adapter [EMACB1]
-->EMACB::DeviceReset
-->EMACB::DeviceReset
CopyFile: 0
RegOpenKeyEx Comm\EMACB1 0
IPAddr: 192.168.1.100 SunnetMask: 255.255.255.0 Gateway: 192.168.1.1
FileName:\NandFlash\dbginfo.txt
CreatFile C3AE6F16
File bResult=1 nBytes=156
DHCP Disable
IP Parameters aren<|>t changed, need not set AdapterIPProperties
-->EMACB::DeviceReset
【以下附开机启动界面部分打印信息】
Press [ENTER] to launch image stored in flash or [SPACE] to cancel.
Initiating image launch in 0 seconds. System ready!
Preparing for download...
memset 80067000 len=1c8b7c0
FMD_DirectRead - OEMReadImgFromFlash - Addr = 60000
Download successful! Jumping to image at 0x80068000 (physical 0x20068000)...
]ス懡萃?亃暽箷眮櫧蓙I5仯ⅰ盏墎箙壉晳榨毖伣箒諠亙?拏偮
褋怕覛乱毬jR%綅曂徒
蒕辶曱率挷挄佶庭焦跽jR4羮厜氧殭櫃樟倐毩}ド捧矙櫃舍倐毩}展憰欟櫃櫃嶀羵z5憫蓵
屯Q厜睍侕聜偛聜拏j暪懡萃??ド递吷晛z1%寡蒑褏靴峇蓞雇眳褧5rjz1%寡?攻选蓫?
奐jR斿+嫢叡ラ晛懮ベ暽?R?<|>F哟 ?匨aster Clock is 90004387 Hz
---------------------------------------
--- Configuring Chip Select 1 ---
---------------------------------------
--- Desired timings ---
---------------------------------------
dwNWE_SETUP 0
dwNCS_WR_SETUP 0
dwNRD_SETUP 0
dwNCS_RD_SETUP 0
dwNWE_PULSE 0
dwNCS_WR_PULSE 0
dwNRD_PULSE 0
dwNCS_RD_PULSE 0
dwNRD_CYCLE 0
dwNWE_CYCLE 0
dwClockPeriod_ns 11
---------------------------------------
--- Real timings ---
---------------------------------------
dwNWE_SETUP 0
dwNCS_WR_SETUP 0
dwNRD_SETUP 0
dwNCS_RD_SETUP 0
dwNWE_PULSE 0
dwNCS_WR_PULSE 0
dwNRD_PULSE 0
dwNCS_RD_PULSE 0
dwNRD_CYCLE 0
dwNWE_CYCLE 0
OALTimerInit
+OALTimerInit
Master Clock is 90004387 Hz
Test : 0x15f9
g_oalTimer.msecPerSysTick : 0x1
g_oalTimer.countsPerMSec : 0x15f9
g_oalTimer.countsMargin : 0x0
g_oalTimer.maxPeriodMSec : 0xb9
g_oalTimer.countsPerSysTick : 0x15f9
g_oalTimer.actualMSecPerSysTick : 0x1
g_oalTimer.actualCountsPerSysTick : 0x15f9
g_oalTimer.curCounts : 0x0
Master Clock is 90004387 Hz
-OALTimerInit
pDrvGlobalArea->bEboot == TRUE. Forcing Clean Object store
+OEMPowerManagerInit
-OEMPowerManagerInit
avant OALKitlStart - force clean (@0x81d5c9d4 = 0x1) = TRUE
OALKitlStart
Firmware Init Done.
+OEMInitWatchDogTimer
AT91SAM926x_DispWatchDog 8000!
force clean (@0x81d5c9d4 = 0x1) = TRUE
EM9X60 Init
Master Clock is 90004387 Hz
---------------------------------------
--- Configuring Chip Select 5 ---
---------------------------------------
--- Desired timings ---
---------------------------------------
dwNWE_SETUP 50
dwNCS_WR_SETUP 30
dwNRD_SETUP 50
dwNCS_RD_SETUP 30
dwNWE_PULSE 420
dwNCS_WR_PULSE 440
dwNRD_PULSE 420
dwNCS_RD_PULSE 440
dwNRD_CYCLE 500
dwNWE_CYCLE 500
dwClockPeriod_ns 11
---------------------------------------
--- Real timings ---
---------------------------------------
dwNWE_SETUP 55
dwNCS_WR_SETUP 33
dwNRD_SETUP 55
dwNCS_RD_SETUP 33
dwNWE_PULSE 429
dwNCS_WR_PULSE 440
dwNRD_PULSE 429
dwNCS_RD_PULSE 440
dwNRD_CYCLE 517
dwNWE_CYCLE 517
->EM9260 Features Setup
EM9x60 Valid Check Passed
EM9x60 Platform Check WinCE
LCD...Type = 3, Started
Sp=ffffc7cc
OEMIoControl: Unsupported Code 0x10100b4 - device 0x0101 func 45
+OALIoCtlHalInitRTC(...)
OEMIoControl: Unsupported Code 0x101008c - device 0x0101 func 35
->LLD_InitNandChipset K9F5608U0D
+OALIntrRequestSysIntr(1, 0x8d, 0x00000000)
-OALIntrRequestSysIntr(sysIntr = 16)
Master Clock is 90004387 Hz
---------------------------------------
--- Configuring Chip Select 3 ---
---------------------------------------
--- Desired timings ---
---------------------------------------
dwNWE_SETUP 19
dwNCS_WR_SETUP 0
dwNRD_SETUP 19
dwNCS_RD_SETUP 0
dwNWE_PULSE 38
dwNCS_WR_PULSE 76
dwNRD_PULSE 38
dwNCS_RD_PULSE 76
dwNRD_CYCLE 76
dwNWE_CYCLE 76
dwClockPeriod_ns 11
---------------------------------------
--- Real timings ---
---------------------------------------
dwNWE_SETUP 22
dwNCS_WR_SETUP 0
dwNRD_SETUP 22
dwNCS_RD_SETUP 0
dwNWE_PULSE 44
dwNCS_WR_PULSE 77
dwNRD_PULSE 44
dwNCS_RD_PULSE 77
dwNRD_CYCLE 88
dwNWE_CYCLE 88
+OALIntrReleaseSysIntr(16)
-OALIntrReleaseSysIntr(rc = 1)
+OALIntrRequestSysIntr(1, 0x8d, 0x00000000)
-OALIntrRequestSysIntr(sysIntr = 16)
Master Clock is 90004387 Hz
---------------------------------------
--- Configuring Chip Select 3 ---
---------------------------------------
--- Desired timings ---
---------------------------------------
dwNWE_SETUP 10
dwNCS_WR_SETUP 0
dwNRD_SETUP 10
dwNCS_RD_SETUP 0
dwNWE_PULSE 30
dwNCS_WR_PULSE 40
dwNRD_PULSE 40
dwNCS_RD_PULSE 40
dwNRD_CYCLE 60
dwNWE_CYCLE 60
dwClockPeriod_ns 11
---------------------------------------
--- Real timings ---
---------------------------------------
dwNWE_SETUP 11
dwNCS_WR_SETUP 0
dwNRD_SETUP 11
dwNCS_RD_SETUP 0
dwNWE_PULSE 33
dwNCS_WR_PULSE 44
dwNRD_PULSE 44
dwNCS_RD_PULSE 44
dwNRD_CYCLE 66
dwNWE_CYCLE 66
FMD_GetBlockStatus::Logical block 0x225 is marked as bad
FMD_GetBlockStatus::Logical block 0x52C is marked as bad
OEMIoControl: Unsupported Code 0x10100c4 - device 0x0101 func 49
OEMIoControl: Unsupported Code 0x10100c4 - device 0x0101 func 49
SPIDriver - SPI_Init - Context: Drivers\Active\03
Quit SPI Driver Installation!
SPIDriver - SPI_Init - Context: Drivers\Active\04
Quit SPI Driver Installation!
SPIDriver - SPI_Init - Context: Drivers\Active\05
Quit SPI Driver Installation!
SPIDriver - SPI_Init - Context: Drivers\Active\06
Quit SPI Driver Installation!
CAN Driver, Compiled at May 27 2010 10:50:16
+OALIntrRequestSysIntr(1, 0x1d, 0x00000000)
-OALIntrRequestSysIntr(sysIntr = 18)
OEMIoControl: Unsupported Code 0x10100d0 - device 0x0101 func 52
OEMIoControl: Unsupported Code 0x10100f8 - device 0x0101 func 62
Loading WinCE driver for ATMEL EMACB controller
Using registry ethernet configuration
-->EDeviceInitialize(0)
Hardware Reset PHY
PHY ID : 181b881
PHY_GetConfiguration : autoneg not complete
PHY_WaitForAutonegociationComplete Autoneg not complete
Autonegociation failed
+OALIntrRequestSysIntr(1, 0x15, 0x00000008)
-OALIntrRequestSysIntr(sysIntr = 17)
USB:OhcdPdd_Init
++InitializeOHCI
+OALIntrRequestSysIntr(1, 0x14, 0x00000000)
-OALIntrRequestSysIntr(sysIntr = 19)
--InitializeOHCI
+OALIntrRequestSysIntr(1, 0xa, 0x00000000)
-OALIntrRequestSysIntr(sysIntr = 20)
+OALIntrRequestSysIntr(1, 0x85, 0x00000000)
-OALIntrRequestSysIntr(sysIntr = 21)
Master Clock is 90004387 Hz
Quit Audio Driver Installation!
[ERROR] "PDD_AudioInitialize() FAILED"
CAN Driver, Compiled at May 27 2010 10:50:16
CAN_Init::quit CAN2 driver installation.
DeviceFolder::LoadDevice!Enumerate Found deprecated load instructions at (Driver
s\BuiltIn\AFD). Driver cannot be unloaded.
+OALIntrRequestSysIntr(1, 0x6, 0x00000
000)
-OALIntrRequestSysIntr(sysIntr = 22)
Master Clock is 90004387 Hz
+OALIntrRequestSysIntr(1, 0x8, 0x00000000)
-OALIntrRequestSysIntr(sysIntr = 23)
Master Clock is 90004387 Hz
+OALIntrRequestSysIntr(1, 0x7, 0x00000000)
-OALIntrRequestSysIntr(sysIntr = 24)
Master Clock is 90004387 Hz
+OALIntrRequestSysIntr(1, 0x17, 0x00000000)
-OALIntrRequestSysIntr(sysIntr = 25)
Master Clock is 90004387 Hz
+OALIntrRequestSysIntr(1, 0x19, 0x00000000)
-OALIntrRequestSysIntr(sysIntr = 26)
Master Clock is 90004387 Hz
+OALIntrRequestSysIntr(1, 0x18, 0x00000000)
-OALIntrRequestSysIntr(sysIntr = 27)
Master Clock is 90004387 Hz
DeviceFolder::LoadDevice!Enumerate Found deprecated load instructions at (Driver
s\BuiltIn\PPP). Driver cannot be unloaded.
ExSerInit::quit COM8 driver installati
on.
Hardware doesn<|>t init correctly, COM_Init failed
-->EMACB::DeviceReset
ExSerInit::quit COM9 driver installation.
Hardware doesn<|>t init correctly, COM_Init failed
ExSerInit::quit COM10 driver installation.
Hardware doesn<|>t init correctly, COM_Init failed
ExSerInit::quit COM11 driver installation.
Hardware doesn<|>t init correctly, COM_Init failed
ExSerInit::quit COM12 driver installation.
Hardware doesn<|>t init correctly, COM_Init failed
ExSerInit::quit COM13 driver installation.
Hardware doesn<|>t init correctly, COM_Init failed
ExSerInit::quit COM14 driver installation.
Hardware doesn<|>t init correctly, COM_Init failed
ExSerInit::quit COM15 driver installation.
Hardware doesn<|>t init correctly, COM_Init failed
+OALIntrRequestSysIntr(1, 0x1e, 0x00000000)
-OALIntrRequestSysIntr(sysIntr = 28)
OEMIoControl: Unsupported Code 0x10100fc - device 0x0101 func 63
EM9X60 built at May 27 2010 10:52:05
Adaptation performed by Emtronix (c)
AdapterName: EMACB1-->EMACB::DeviceReset
Explorer(V2.0) taskbar thread started.
NDISPWR:: Found adapter [EMACB1]
-->EMACB::DeviceReset
-->EMACB::DeviceReset
CopyFile: 0
RegOpenKeyEx Comm\EMACB1 0
IPAddr: 192.168.1.100 SunnetMask: 255.255.255.0 Gateway: 192.168.1.1
FileName:\NandFlash\dbginfo.txt
CreatFile C3AE6F16
File bResult=1 nBytes=156
DHCP Disable
IP Parameters aren<|>t changed, need not set AdapterIPProperties
-->EMACB::DeviceReset
