bruce
Post By：2009-7-28 11:20:00 [只看该作者]
用EM9000的开发板与ETA921连接640*480的LCD时可以正常连接运行，后面改为由ETA923与1048*768CRT显示器连接，但无法显示，所以通过EVC上的remove registry editor修改注册表中的display信息后，任然无法显示，断开连接，仍旧采用ETA921与LCD连接显示，发现与开发主机连接不上了，LCD也不能够显示，LCD无法显示可能和修改注册表内容有关，但是因为连接不上，现在却无法恢复原来的注册表内容了，不知道连接不上是否与修改注册表有关？现在这种情况下该怎么做呢？
下面为通过超级重点看到的启动信息：
Windows CE Kernel for ARM (Thumb Enabled) Built on Jun 24 2004 at 18:25:00
ProcessorType=0920 Revision=0
sp_abt=ffff5000 sp_irq=ffff2800 sp_undef=ffffc800 OEMAddressTable = 80201270
InitClock...
Processor = 199Mhz, Bus = 99Mhz
OEMGetExtensionDRAM
Sp=ffffc7cc
RTC status ffffff90
Time is
54 --- (0)
55 --- (1)
89 --- (2)
28 --- (3)
7 --- (4)
9 --- (5)
2 --- (6)
Time orig 2009/7/28 9:55:54
INFO: FMD_Init.
INFO: InitializeFlash. Intel J3 like Flash defined
InitializeFlash: (1 -- 512 --262144).
INFO: FMD_Init: Flash Address=0xa9800000 Length=0x800000.
Audio reset pin 0x1 bit 0x40 mute 1
Audio configuring for CS4271
Unsupported dwCode = 0x00321000 in WAV_IOControl()
OEMSetWakeupSource dwSource = 0x18
MXDM_GETNUMDEVS
DeviceFolder::LoadDevice!Enumerate Found deprecated load instructions at (Driver
s\BuiltIn\AFD). Driver cannot be unloaded.
DeviceFolder::LoadDevice!Enumerate Fou
nd deprecated load instructions at (Drivers\BuiltIn\PPP). Driver cannot be unloa
ded.
Init Raster engine
Clearing screen
AllocSurface - Out of Memory 2
Couldn<|>t allocate primary surface
Data Abort: Threa
d=83d1f748 Proc=82025fd0 <|>gwes.exe<|>
AKY=00000009 PC=03175a78(ddi.dll+0x00005a78) RA=03175a70(ddi.dll+0x00005a70) BVA
=08000018 FSR=00000007
Data Abort: Thread=83d1f748 Proc=82025fd0 <|>gwes.exe<|>
AKY=00000009 PC=03174d94(ddi.dll+0x00004d94) RA=00028084(gwes.exe+0x00018084) BV
A=08000000 FSR=00000007
下面为通过超级重点看到的启动信息：
Windows CE Kernel for ARM (Thumb Enabled) Built on Jun 24 2004 at 18:25:00
ProcessorType=0920 Revision=0
sp_abt=ffff5000 sp_irq=ffff2800 sp_undef=ffffc800 OEMAddressTable = 80201270
InitClock...
Processor = 199Mhz, Bus = 99Mhz
OEMGetExtensionDRAM
Sp=ffffc7cc
RTC status ffffff90
Time is
54 --- (0)
55 --- (1)
89 --- (2)
28 --- (3)
7 --- (4)
9 --- (5)
2 --- (6)
Time orig 2009/7/28 9:55:54
INFO: FMD_Init.
INFO: InitializeFlash. Intel J3 like Flash defined
InitializeFlash: (1 -- 512 --262144).
INFO: FMD_Init: Flash Address=0xa9800000 Length=0x800000.
Audio reset pin 0x1 bit 0x40 mute 1
Audio configuring for CS4271
Unsupported dwCode = 0x00321000 in WAV_IOControl()
OEMSetWakeupSource dwSource = 0x18
MXDM_GETNUMDEVS
DeviceFolder::LoadDevice!Enumerate Found deprecated load instructions at (Driver
s\BuiltIn\AFD). Driver cannot be unloaded.
DeviceFolder::LoadDevice!Enumerate Fou
nd deprecated load instructions at (Drivers\BuiltIn\PPP). Driver cannot be unloa
ded.
Init Raster engine
Clearing screen
AllocSurface - Out of Memory 2
Couldn<|>t allocate primary surface
Data Abort: Threa
d=83d1f748 Proc=82025fd0 <|>gwes.exe<|>
AKY=00000009 PC=03175a78(ddi.dll+0x00005a78) RA=03175a70(ddi.dll+0x00005a70) BVA
=08000018 FSR=00000007
Data Abort: Thread=83d1f748 Proc=82025fd0 <|>gwes.exe<|>
AKY=00000009 PC=03174d94(ddi.dll+0x00004d94) RA=00028084(gwes.exe+0x00018084) BV
A=08000000 FSR=00000007
